U-Boot Beton is a recycled polypropylene formwork that was designed to create lightened slabs and rafts. The use of U – Boot Beton formwork makes it possible to create mushroom pillars, with the possibility to have the mushroom in the thickness of the slab.
U-Boot Beton is the ideal solution for creating structural slabs with large spans up to 20m that can support large loads with lower thicknesses. This results in a considerable reduction in the use of concrete and steel, reduction of weight, reduction of deformation, reduction of columns and foundation loads and sections. Light and quick and easy to position, thanks to their modularity the designer can vary the geometric parameters as needed to adapt to all situations with great architectural freedom.
Advantages
1.Increased number of floors possibility to gain floors at the same building height (towers) and building volume.
2.Lack of rising beams flat soffit for greater flexibility when installing systems.
3.Reduced slab thickness thinner slabs but with equal loads and clearances, or bigger clearances with an equal thickness.
4.Large span and great architectural freedom larger spaces. less architectural restrictions. freedom of future reconversion of the environments from an architectural-functional point of view.
5.Flexibility in the realization of openings after the execution of the slab.
6.Reduction in the number of pillars facilitated use reallocation. wider bays.
7.Optimization of the section of pillars
8.Improved acoustic behaviour
less acoustic transmittance.
9.Possibility of passing utilities in the thickness of the slab
10.Possibility to use it with post-tension
11.Reduced foundations lower costs for foundation excavations. less excavation.
12.Reduction in the overall load of the structure weighing on the pillars and the foundation.
Applications
U-Boot®️ Beton is a recycled polypropylene formwork that was designed to create two-way voided slabs and rafts. The use of U-Boot®️ Beton formwork makes it possible to create mushroom pillars, with the possibility to have the mushroom in the thickness of the slab.
Thanks to the conic elevator foot, immerging the U-Boot®️ Beton formworks in the concrete casting will create a gridwork of mutually perpendicular beams closed from the bottom and the top by a flat plate that is created with a single casting; this results in considerable reduction in the use of concrete and steel.
U-Boot®️ Beton is used to create slabs with large span or that are able to support large loads without beams.
Light and quick and easy to position, thanks to their modularity the designer can vary the geometric parameters as needed to adapt to all situations with great architectural freedom.